Home > Knowledge > Content

Qualigy 100% Pure Teflon PTFE Rod


Product Description
                  Qualigy 100% pure Teflon PTFE rod      

Product Description
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE (Teflon) rod and molded PTFE (Teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod as your requirements.

Extruded Teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, and dielectric material and so on.


Specificaton:
(1)PTFE extruded rod
Diameter: 2-200mm
Length: 1000-5000mm
Density: 2.21g/cm3
  
(2)PTFE molded rod
Diameter: 6~350mm
Length: 100-500mm
Density: 2.22g/cm3
Virgin, recycled, filled ptfe rod is available
Size according to customers' need
 
Diameter(mm)Length(mm)
NominalToleranceNominalTolerance
5,6+0.480100+5.0
7,8,9+0.580100+5.0
10,13,15,16,18+1.100100,1000+3.60
20,25,30+1.130100,1000+3.60
35,40,45,50+1.600100,1000+3.60
55,60,65,70,75,80,85,90,100+2.000100,1000+2.50
110,120,150,200+2.500100,1000+2.50
 
Properties:
ItemData 
Apparent density2.10-2.30 g/ cm3
Tensile Strength≥14 Mpa
Elongation at break≥140%
Working Temp-180~260ºC
Melting point330ºC
Produce Max.Temp390ºC
Compressive strength 1% deformation400-500%
Hardness50-60 shored
Water absorption0.01%
 
 Application:
1 Chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc.
2. Machine: used in piston ring, guide ring, machine tool guideways etc.
3. Electrical and Electronic Engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: PTFE product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc.