PTFE (TEFLON) Sheet Molded
Product Detail
Product Description
AFOOS-PS002 Molded Ptfe Sheet
PTFE is a low friction fluoropolymer with outstanding chemical and weathering resistance. The working temp range is -180C - +260C.It has the lowest coefficient of any solid. It has no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to unheated surfaces. Both virgin and mechanical grades are UV stabilized.Virgin material meets FDA standards.
AFOOS molded ptfe plate can be maded in thickness 2mm to 60mm,Plate is inventoried in sizes from 0.3M square to 1.5M square,By our technology makes Thickness tolerances range plus 5%~10%.AFOOS also will produce special size molds for production quantities of non-standard dimensional plate. Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Plate is ideal for cutting into bIanks for machining into smaller parts.
*The material may be ordered etched for bonding on one or both sides for an additional charge (both Sodium Ammonia and Sodium Naphthalene etching are offered).
PTFE is a low friction fluoropolymer with outstanding chemical and weathering resistance. The working temp range is -180C - +260C.It has the lowest coefficient of any solid. It has no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to unheated surfaces. Both virgin and mechanical grades are UV stabilized.Virgin material meets FDA standards.
AFOOS molded ptfe plate can be maded in thickness 2mm to 60mm,Plate is inventoried in sizes from 0.3M square to 1.5M square,By our technology makes Thickness tolerances range plus 5%~10%.AFOOS also will produce special size molds for production quantities of non-standard dimensional plate. Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Plate is ideal for cutting into bIanks for machining into smaller parts.
*The material may be ordered etched for bonding on one or both sides for an additional charge (both Sodium Ammonia and Sodium Naphthalene etching are offered).
PTFE Material | Virgin PTFE | Reprocessed | Virgin PTFE Filled With | |||
Filler | None | None | Glass Fiber | Graphite | Carbon | Bronze |
Filler Content By Weight | 0% | 0% | 25% | 10% | 10% | 40% |
PROPERTIES | ||||||
Specific Gravity | 2.2 | 2.16 | 2.22 | 2.13 | 2.13 | 3.3 |
Tensile Strength @ Break(PSI) | 15000-3500 | 1500-2400 | 2000-3000 | 2000-3000 | 2000-3000 | 2000-3000 |
Elongation @ Break | 250-350 | 75-200 | 100-260 | 100-260 | 100-260 | 100-260 |
Shore D Hardness | 54 | 56 | 63 | 57 | 62 | 65 |
Dielectric(Volts/Mil) | 2100 | 600 | - | - | - | - |